How to Stop Garage Door Halfway

If you’ve ever opened your garage door only to find it stopping halfway, you know how frustrating the experience can be. You may struggle with the issue time and time again without success—which is why we are here to help!

How to Stop Garage Door Halfway

In this blog post, we will discuss some of the common causes of how to stop garage door halfway and provide simple fixes for each one so that you can quickly get your door back in working order. Keep reading to learn more about how to stop a garage door from going up or down midway!

Summary: Garage door wires can be unsightly and dangerous when left exposed. To avoid this, it is important to hide them away properly. This can be done by running the wires through plastic or metal conduit or along walls and framing members behind the drywall. Concealing the wires will help reduce the risk of a tripping hazard and prevent any potential damage from being done to the wires.

Why Does the Garage Door Open Halfway?

There are several factors that can cause a garage door to open only halfway. One of the most common causes is a misaligned photo eye sensor. The photo eye sensors are optical devices that detect whether or not something is blocking the path of the closing door.

When these sensors become misaligned, they fail to detect obstacles which then causes the door to open halfway. Other possible causes include a malfunctioning garage door opener, an obstruction in the track, and a weak or broken spring.

It’s important to identify the root cause of your partially opened garage door before attempting any repair work. This can help ensure that you don’t make the problem worse or create additional damage. If you’re not sure what’s causing the malfunction, it can be a good idea to contact an experienced garage door technician for help.

With their expertise and knowledge, they can quickly identify the problem and provide the necessary repairs to get your door back up and running properly again.

Once you know what’s causing the issue, you can start to take steps to stop your garage door from opening only halfway. Some of the most effective methods include making sure that all sensors are correctly aligned, checking for obstructions in the track, testing and replacing any malfunctioning parts in the opener system, and adjusting or replacing broken or weak springs.

All Sensors Are Correctly Aligned

10 Methods How to Stop Garage Door Halfway

1.  Inspect the Tracks and Rollers

One of the first things you should do if your garage door is stuck halfway is to inspect the tracks and rollers. Over time, the tracks can become bent or warped, which can cause the door to become stuck. Additionally, the rollers can become worn down or damaged, which can also cause the door to become stuck.

2.  Clean the Tracks and Rollers

If the tracks and rollers are dirty, they may cause the door to become stuck. Use a rag or brush to clean off any dirt, debris, or grime that may be on the tracks or rollers. If cleaning the tracks does not help, you may need to lubricate them with a silicone-based lubricant.

This will allow the wheels to move freely and help keep your door running smoothly. While lubricating, check for any signs of damage or wear and tear. If the tracks are severely damaged, they may need to be replaced.

3.  Lubricate the Tracks and Rollers

Lubricating the tracks and rollers can help to reduce friction, allowing the garage door to move more freely. This can help prevent it from getting stuck halfway and making a grinding noise. Start by cleaning the tracks with warm soapy water and wiping them down with a cloth.

Once they are clean, lubricate them using a silicone-based lubricant. You should also take some time. To lubricate the rollers and any other moving parts of the garage door. This can help to reduce wear and tear on the components and ensure that the door operates smoothly.

4.  Check for Obstructions

Another reason why your garage door may be stuck halfway is that there is an obstruction in the way. Check to see if there are any objects, such as boxes or bikes, that are blocking the path of the door. If so, remove them from the way and try opening the door again.

If this does not work, then you may need to inspect the sensors. Make sure that the sensors are unobstructed and working properly. If they are blocked, then you will need to adjust them or clean off any dirt that is blocking them. Once this is done, try opening the garage door again.

Need to Inspect the Sensors

If it still does not open, then it may be time to speak with a professional garage door repair service. They will be able to diagnose and fix any problems with your door quickly and safely.

5.  Check the Garage Door Opener

If your garage door is equipped with a garage door opener, it may be malfunctioning. Check to see if there is anything obstructing the sensor eyes, which are located on either side of the garage door opener unit.

Additionally, check to see if the batteries in the garage door opener unit are fresh. If not, replace them with new batteries and try opening the door again. If the problem persists, you may need to call in a professional repairman.

6.  Manually Open the Door

If all else fails, you may need to manually open your garage door. First, disconnect your garage door opener unit by pulling on the red cord that is attached to it.

Next, locate the release handle on your garage door (this is typically a rope or cord that is hanging down from inside of the garage door). Pull on the release handle to disengage the torsion springs and allow you to manually open your garage door.

If you are unable to locate the release handle, consult your owner’s manual for more detailed instructions. After manually opening the door, contact a professional garage door repair service to help you diagnose and resolve the issue.

7.  Adjust the Tension

Adjusting the tension can also help to stop your garage door from opening too far. To do this, you will need to locate the tension springs on either side of the garage door. You can then use an adjustable wrench to adjust the tension on the springs. It’s important to be careful when adjusting these, as they are under a lot of tension and can be dangerous.

Once you have adjusted the tension, try opening the garage door again and see how far it opens. If you find that it still opens too far, you may need to adjust the tension further until you get the desired result.

You Have Adjusted the Tension

Once your garage door is properly adjusted, it should stop at the same point every time it is opened. This will help to ensure that your garage door remains secure and safe from intruders.

8.  Replace the Springs

If the tension in the torsion springs cannot be adjusted, it may be time to replace them. This is also a job that should only be performed by a professional.

If you plan on replacing the springs yourself, be sure to use caution, as incorrect installation of torsion springs can cause them to break with tremendous force. Although it is possible to replace garage door springs on your own, it is better to let an expert handle the job.

9.  Check for Worn or Damaged Parts

Sometimes, worn or damaged parts within the garage door opener system can cause your garage door to become stuck halfway. Check all of the parts in the system, such as the chain, cables, and pulleys. If any of them appear worn or damaged, they should be replaced.

Additionally, check the springs and other components to make sure they are properly connected and functioning correctly. If any of these parts are loose or worn out, this may be the cause of your garage door becoming stuck halfway.

10.  Contact a Professional

If you’re still having trouble getting your garage door to stop halfway, you may need to contact a professional. Make sure that the person you call is qualified and experienced in garage door repair and safety, as this will ensure that your problem is solved properly.

A professional should be able to look at the entire system, including the track system and the wiring, to determine what’s causing your door to stop halfway and fix it safely. They may also be able to recommend a new door opener that will work better for you in the future.

Able to Look at the Entire System


There are a few things you can do to fix a garage door that stops halfway. By checking the sensors, lubricating the tracks, and making sure the opener is working properly, you can usually get your garage door back up and running smoothly.

If these troubleshooting tips don’t work, it’s time to call in a professional. A trained technician will be able to diagnose and fix the problem quickly so you can get back to your normal routine.

We hope this guide on how to stop garage door halfway was helpful. Please share it with your friends on social media if you find it useful. And be sure to check back here soon for more informative guides like this one.

Photo of author

Rick Kelly

I am Rick. I grew up helping my dad with his handyman service. I learned a lot from him about how to fix things, and also about how to work hard and take care of business. These days, I'm still into fixing things- only now, I'm doing it for a living. I'm always looking for new ways to help people grow and develop. That's why I have created this blog to share all my experience and knowledge so that I can help people who are interested in DIY repair.

Leave a Comment