How to Keep Garage Light on

When it comes to protecting your home and valuables, having a well-lit garage is an important part of security. Keeping the lights on in your garage can help alert you to any suspicious activity around your home and make it easier for you to find what you need when working or retrieving items from storage.

How to Keep Garage Light on

Additionally, leaving your garage door open during the day can be an invitation to trespassers, so learning how to keep your garage light on is an important skill.

Increased security is one of the biggest advantages of keeping your garage light on. A bright light in the space makes it more difficult for intruders or burglars to break in without being spotted.

Additionally, having a light on can help deter potential criminals as they will see that someone is home and may reconsider their actions. In this blog post, You will learn in detail how to keep garage light on.

Step by Step Processes for How to Keep Garage Light on

Step 1: Inspect the Existing Circuit

Before attempting to modify the existing circuit, ensure it is correctly wired and in good condition. Check for any frayed or exposed wires, loose connections, or other damage that could create a safety hazard.

Step 2: Add a Power Source

If the current circuit does not have enough power to support the new light fixtures, additional wiring may be necessary. Adding an additional circuit or power source is the best option to ensure the light fixtures are safely powered.

An interrupter switch will allow you to control when the lights in your garage turn on and off. This type of switch can be installed next to the existing light fixture and wired directly into the house’s electrical circuits.

Interrupter Switch Will Allow You to Control

Step 3: Wire the New Fixtures

After the installation of an interrupter switch, the new fixtures can be wired directly into the circuit. Make sure to use wiring appropriate for the type of light being installed. Replacing your current light switches with ones compatible with the new lights will ensure that the light fixtures turn on and off correctly.

Step 4: Connect the Fixtures to the Interrupter Switch

Once the wiring is complete, connect the new fixtures to the interrupter switch. This will ensure that when you power on and off your lights, they are connected to this switch instead of directly into a power source.

To ensure that your lights stay on when you want them to, install a timer switch. This will allow the lights to be set to run for a specific amount of time before powering off.

Step 5: Test the Circuit

After all of the wiring is complete and connected, make sure to test it out to make sure everything is working properly. After testing, go over all the wiring and connections again to ensure that none are frayed or exposed. If any issues are found, they should be fixed immediately to prevent electric shocks or fires.

Now that you’ve finished the wiring enjoy the new lights in your garage. As long as they are connected to a power source and interrupter switch, they should stay on for many years to come.

Safety Precautions for How to Keep Garage Light on

Ensure All Bulbs Are Working Properly
  1. Check to ensure all bulbs are working properly before leaving the garage. If any of them are not working, replace them immediately.
  2. Ensure the light switch is in the “on” position when leaving the garage or use a timer if possible. This way, your light will stay on even if you forget to turn it off.
  3. Install motion sensors on your lights if you don’t want them on all the time. This is a great way to keep energy costs low and get the light when needed.
  4. Utilize natural daylight by leaving windows open during the day and turning on the lights only at night. This will also help you save on energy costs.
  5. Make sure to properly maintain your lights and replace any bulbs that have burned out quickly. This will ensure a longer lifespan for the bulbs and less likelihood of having a light outage in your garage.
  6. Consider investing in solar-powered lighting for your garage, as this is usually the most cost-effective option for lighting and will help you save energy.
  7. Have an emergency plan in place in case your lights go out. Ensure your family knows what to do in case of a power outage, as this could help keep everyone safe.

Following these safety precautions can help you ensure your garage light stays on and keeps you safe.

How Often Should You Check and Maintain the Light Fixtures in Your Garage? 

To keep your garage light on, it is important to check and maintain the light fixtures in your garage regularly. This will help ensure they are working properly and reduce the risk of damage or fire from faulty wiring.

Maintain the Light Fixtures in Your Garage Regularly

When checking the lights in your garage, you should do so at least once a month. Check for loose wiring, frayed or burned-out cords, and defective bulbs or fixtures. Additionally, ensure the switch is secure and that all connections are tight.

If you notice any of these issues with your garage lights, a qualified electrician must have them repaired immediately. This will help ensure they are working safely and correctly, so you can keep your garage light on.

You should also regularly clean your garage light fixtures and any protective covers or shades. Dust and dirt can build up over time and prevent the light from working efficiently, so removing this buildup every few weeks is important.

Are There Any Energy-saving Options for Keeping a Light on in Your Garage? 

Yes. There are several energy-saving options for keeping a light on in your garage. One of the most popular and cost-effective solutions is to install motion sensors that will turn on a light when someone enters the garage and then turn off after they leave. This can be an excellent way to save energy while providing adequate lighting for safety and security.

Other options include installing LED or CFL bulbs that use less energy than traditional incandescent bulbs and investing in solar-powered lights, which are powered by the sun during the day and turn on automatically at night when motion is detected.

These solutions can help you keep your garage light on without wasting energy. Finally, if you want to ensure complete safety and security, you may want to invest in a timer that will switch the lights on at a certain time each night and off again in the morning. This can be very useful for those who don’t have motion sensors or solar-powered lights available.

How Can You Make Sure the Bulbs Last Longer and Save Money? 

Ensuring your garage light stays on is a great way to save energy and money. However, it can also help you ensure the bulbs last longer too. Here are some tips for getting the most out of each bulb in your garage lighting setup:

  • Use LED Lights: LED bulbs use far less energy than traditional incandescent bulbs and last significantly longer. Investing in good quality LED bulbs for the lighting in your garage is a great way to save money on energy and replacement costs.
  • Install Motion Sensors: Motion sensors are a great option to ensure that the lights only stay on when needed. This means you don’t have to worry about leaving them on accidentally and wasting electricity.
  • Use a Timer: Timers are especially helpful if you’re not always around to turn the lights on and off. They can be set to switch them off at specific times of day or night so that there’s no risk of accidentally leaving them on.
  • Clean the Bulbs Regularly: Dust, dirt, and grime build up on bulbs over time, which can reduce the amount of light they give off. Keeping them clean will help them work more efficiently and last longer too.
Motion Sensors Are a Great Option

By following these tips, you can ensure that your garage lighting stays on and that you get the most out of each bulb. This way, you’ll save energy and money while keeping your home well-lit.

What Type of Lighting Options Are Available to Keep Your Garage Light on? 

When it comes to keeping your garage light on, several options are available. The most common type of lighting is incandescent bulbs, which provide a warm and inviting atmosphere in any space.

These bulbs require regular replacements due to their short lifespan, but they’re also the cheapest option. Another popular choice for garage lighting is fluorescent bulbs. These types of bulbs produce a bright white light that is perfect for larger spaces, and they last much longer than incandescent bulbs.

Fluorescent lighting options can be more expensive upfront, but they’ll save you money in the long run due to their extended lifespan. LED lights are another popular choice for garage lighting.

LEDs provide an even brighter white light that is perfect for illuminating large spaces. They also have a much longer lifespan than both incandescent and fluorescent bulbs, making them the most cost-effective option in the long run.


In conclusion, having a working light in your garage is essential for safety and convenience. You can take several easy steps to ensure your garage light stays on, such as making sure the bulbs are replaced regularly, checking the power source and wiring connections, and using motion sensors or timers.

Don’t let a simple task like keeping your garage light on become an afterthought – make sure you take the necessary steps to keep it working properly and easily accessible. I hope this article has been beneficial for learning how to keep garage light on. Make Sure the precautionary measures are followed chronologically. 

Photo of author

Rick Kelly

I am Rick. I grew up helping my dad with his handyman service. I learned a lot from him about how to fix things, and also about how to work hard and take care of business. These days, I'm still into fixing things- only now, I'm doing it for a living. I'm always looking for new ways to help people grow and develop. That's why I have created this blog to share all my experience and knowledge so that I can help people who are interested in DIY repair.

Leave a Comment